Products
Colors:
UNDER GERMAN TECHNOLOGY
OJO Premium PU Waterproof
10kg
OJO Premium PU Waterproof is perfect for waterproofing and anti-leakage coating for both renovation and repair works of all types of roofs, decks, walls, pavements, and balconies. It is formulated with high PU concentration and suitable for all-season repair, easy to apply with brush or roller, for both indoor & outdoor applications. Provides high-performance elongation with good adhesion, contains anti-fungus & moss agents to prevent dirt stains. Suitable for various type of surfaces such as concrete, brick, wood, vinyl, fiber cement, PVC and aluminum.
Product Description:
Product Highlights:
- High PU concentration
- 900% Elastomeric (highly flexible)
- 90 days Waterlogging resistant
- Resistance to all weather, UV and chemical agents
- Over 10 years durability
Notes:
- With the homogenous adhesive content, the leftover adhesive can be used again if stored in recommended conditions. Stir adhesive thoroughly before use.
- Multiple coats build up film thickness and increase adhesion and waterproof strength.
Directions for use:
- Substrate should be dry and free of dust, dirt and grease.
- Apply OJO Premium PU Waterproof by brush or roller. Do 3 layers for best waterproofing and durability. Each layer should cross the other at a right angle.
- Temperature resistance to 120 ํC
- Allow 60 - 90 minutes for each layer to dry before applying the next.
- The product will be fully cured within 72 hours.
*Must follow the instructions specified in Technical Data Sheet (TDS)
Coverage:
1 kg/1 sqm (at 3 layer coating without primer). The consumption may be changed depend on the porousness of substrate.
Storage:
18 months. Store in a dry and cool place with a temperature below 30 ํC.
Product Highlights:
- High PU concentration
- 900% Elastomeric (highly flexible)
- 90 days Waterlogging resistant
- Resistance to all weather, UV and chemical agents
- Over 10 years durability
Notes:
- With the homogenous adhesive content, the leftover adhesive can be used again if stored in recommended conditions. Stir adhesive thoroughly before use.
- Multiple coats build up film thickness and increase adhesion and waterproof strength.
Directions for use:
- Substrate should be dry and free of dust, dirt and grease.
- Apply OJO Premium PU Waterproof by brush or roller. Do 3 layers for best waterproofing and durability. Each layer should cross the other at a right angle.
- Temperature resistance to 120 ํC
- Allow 60 - 90 minutes for each layer to dry before applying the next.
- The product will be fully cured within 72 hours.
*Must follow the instructions specified in Technical Data Sheet (TDS)
Coverage:
1 kg/1 sqm (at 3 layer coating without primer). The consumption may be changed depend on the porousness of substrate.
Storage:
18 months. Store in a dry and cool place with a temperature below 30 ํC.